Restaurant Banquettes: Approve the Seat and Table Together

Outdoor lounge chairs and a low table on a covered terrace

AGENT FOSHAN · OUTDOOR AND HOSPITALITY · BUYER NOTES

A banquette and dining table should be reviewed as a pair. Seat depth, back angle, table edge and the base position all affect how customers sit and move in and out.

Explore this guide

Use a full-size trial where possible

Ask for a section through the seat and table, including cushions and upholstery. Confirm usable seating dimensions and the manufacturer’s intended duty. Your designer should review circulation, accessibility and any relevant local requirements. Request cleaning and maintenance information for the exact upholstery and base construction.

A deep back cushion can reduce usable seat depth, while a wide table base can obstruct feet. A simple mock-up or sample seating bay can reveal these issues before a long banquette is made. Keep the approved dimensions with the production drawings.

Keep these details with your order

  • A coordinated seat and table section
  • Finished cushion and back dimensions
  • Project-team review of access
  • Sample approval and cleaning instructions

Specify what is below the upholstery

Ask the supplier to identify the frame, support structure, cushioning, upholstery and visible trim. Record the construction and materials rather than using luxury or commercial grade as the whole description. Ask for evidence behind any durability claims that influence your decision.

If the venue needs particular fire or material performance, have the relevant adviser define the requirements. Request documents for the actual proposed materials and construction. A report for a different fabric or assembly may not answer the project’s requirement.

Plan for cleaning and repairs

Discuss the restaurant’s cleaning routine when choosing upholstery and seams. Review the supplier’s care instructions with the operator. Ask whether cushions or upholstered sections can be replaced and how they are removed.

Look at the base and the gaps between sections. Decide how staff will reach the floor and whether plinths, feet or wall fixings create areas that are difficult to clean. If storage is built into a seat, confirm the opening method and its suitability for the intended use.

Control curves, corners and repeated sections

Give each section a code and show its position on the plan. For curved seating, ask the supplier to provide the dimensions and drawing detail needed to reproduce the intended curve. Your installer should check site conditions and templates where required.

Keep left-hand and right-hand sections distinct. Identify which pieces connect and where joints will appear. A long banquette usually needs a practical delivery and installation plan as well as an attractive elevation drawing.

Ask for a quotation your installer can use

The quote should identify each section, dimensions, quantity, upholstery reference, finish, joining hardware and packing. Ask whether wall fixing details, installation drawings and spare parts are included. Confirm which fixings and labour will be supplied locally.

Compare freight using the packed dimensions. A fully assembled booth may need more space and a different handling plan from a sectional design. Ask the supplier to explain what comes apart and what your installer needs to reassemble.

Inspect before wrapping hides the details

Agree the checks while the order is still being planned. Typical areas to discuss include dimensions, section identification, upholstery appearance, visible finish, joints, stability and supplied hardware. Technical tests need a separate defined method where required.

If a correction is requested, record which sections it affects and how completion will be checked. A photograph of wrapped furniture confirms little about upholstery alignment or the fit between sections.

Prepare for delivery day

Give the supplier and freight team the delivery access restrictions. Check the largest package against doors, lifts and the route through the building. Arrange the unloading equipment and installation team for the actual shipment.

Keep carton and section codes on the receiving list. Count hardware packs and inspect for visible damage before discarding packaging. Follow the agreed carrier and supplier reporting process if anything is missing or damaged.

Use our furniture sourcing checklists to keep quotation details, sample approvals, inspection findings and delivery records together.

Can banquette length be priced without a drawing?

It can support an early estimate. A production quote needs the shape, sections, finishes and site requirements confirmed.

For the wider buying process, read How to Furnish a Restaurant on a Realistic Budget.

Discuss your Foshan order

Planning a hospitality or outdoor furniture order? Send Agent Foshan your item list, intended use, quantities and destination. We can help clarify supplier specifications and coordinate the approved order, quality checks and shipping arrangements.

Explore our buying support · Send your plans and product list

Image: AI-generated design illustration. Product specifications and availability are confirmed individually with suppliers.

Let’s Chat